A cylinder
is the actuator or "motor" side of the system. That is to say, choosing
hydraulic motor for the goods are not as simple as people normally
thought it is. It demands that company understand deeply their produce
piston motor, hydraulic winch, gearbox, hydraulic steering unit, axial
piston motor products and scale to get suitable ones. The "generator"
side of the hydraulic system is the hydraulic winch brings in a fixed or
regulated flow of oil to the bottom side of the cylinder, to move the piston rod upwards.
It also consists of a cylinder barrel, in which a piston connected to
a piston rod moves back and forth. The barrel is closed on each end by
the cylinder bottom and by the cylinder head where the piston rod comes out of the cylinder. And this cylinder transfers linear
motion of the rod to some type of equipment such as a dump truck bed,
bulldozer blade, airplane, elevator, and even the movement of some
robots.
The principle used by a cylinder to operate machinery
is simply a transmission of force applied by pressure onto a fluid that
is incompressible. The fluid is a key part of the cylinder
ability to transmit power from one point to another. It can only
transmit power if the fluid is incompressible. In a hydraulic system,
the hydraulic fluid is always pumped, or transmitted, through a pipe
from the point at which it receives the force, or energy, to the point
where the energy is transferred to another piece of equipment that is to
be moved or operated. This pipe can be any size or length without
reducing or varying the energy it transfers.
In addition to the
above, the piston is also very important. It has sliding rings and
seals. The piston divides the inside of the cylinder in two chambers,
the bottom chamber (cap end) and the piston rod side chamber (rod end).
The hydraulic pressure acts on the piston to do linear work and motion.
The cylinder is probably one of the most efficient methods of producing
power. Of course, it is a kind of cylinders. And it is usually called a
linear hydraulic motor and is a mechanical actuator that is used to
give a unidirectional force through a unidirectional stroke. It is made
up of seven parts, i.e. the cylinder barrel, cylinder bottom or cap,
cylinder head, piston, piston rod , rod gland and other parts.
All in all, the cylinder is one of the key components of some
equipment. Few of us know much about the cylinder although most of us
may be familiar with equipment that is operated by hydraulics. From the
above content, we can learn some basic knowledge about the cylinder.
A piston ring
is a metal band used to control compression and oil in an engine. The
primary function of a top compression ring is to seal compression gas
and help in heat transfer. The second groove ring function is to help
aid in scraping oil down the cylinder .
The function of the oil control ring is to meter the amount of oil in
the cylinder walls and provide ventilation for oil drain back. Piston
rings are made from cast iron, ductile iron or steel. These rings can be
chrome plated, moly inlay, nitride or PVD on the OD face of the rings.
And now for some terms that describe parts of the ring.
The ring diameter refers to the outside diameter of a piston ring when
fitted to the engine bore. In comparison, this is the inside diameter or
ID of a piston ring
when compressed to actual bore size. The radial wall thickness is the
material thickness between the inside and outside diameters of the ring.
And the piston ring face is the portion of the ring that contacts the
cylinder wall. Ring sides are the top and bottom surfaces of the piston
ring. And the axial width is the area across the face of the ring. The
free gap refers to the end clearance when the piston ring
is in its free state. A compressed gap is the end clearance when the
piston ring is compressed to bore diameter. And lastly, the side
clearance is the distance between the axial width of the ring and the
groove width.
Thanks for reading. I hope this article was helpful. Feel free to leave a comment on blog.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
At our official website : www.imyautoparts.com, we offer an extensive selection of car parts on DongFeng heavy truck or Dongfeng commercial vehicle ,
so you can easily find the quality parts you need at the lowest price.
Explore our wide inventory to find both original equipment parts and
aftermarket parts for your vehicle.
When you buy auto parts at our website, you can be confident that we will try to become the best auto parts supplier ,
so you can receive the highest quality auto parts at wholesale prices,
and all the parts we sell come with a full warranty. We also understand
how important it is to get the right car parts that you need. That’s why
all of our car parts come with our Guaranteed DongFeng motor
corporation. If there are ever any issues, we will cover round trip
shipping.
Our auto parts undergo strict quality control tests
to meet the highest industry standards; so you can feel confident that
the truck and car parts you’re ordering from us will perform as
expected. Our auto parts are well sold in the South East Asia, Iran,
Russia and more. At www.imyautoparts.com,
you will find all the auto parts you would ever need, including piston
and accessories, camshaft, muffler clamp, cylinder head gasket,
injector, clutch, oil pipe, suspension, starter, generator, air
compressor and air conditioning compressor, fuel pumps, water pump,
pulley & gear, drag link and connecting rod, fan and accessories,
standard parts, braking system, suspender and suspension shackle, axle
series, cylinder series, drive shaft, steering gear and many other
wholesale auto parts .
We never sell any junkyard automobile parts to our valued customers, so
you will never need to worry about the quality and performance of our
parts and accessories. We encourage you to explore our huge selection of
DongFeng heavy truck and auto parts online , though if you can’t find what you need, please don’t hesitate to call us, and we’ll help you find the parts that you need .
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
We are a leading piston ring
supplier, providing products on Dongfeng heavy Commercial Vehicle.
Applications for our piston rings include landing gear, doors, fuselage,
de-icing valves, chillers, bleed air valves, and auxiliary power units.
Our engineers have extensive experience in designing aircraft seal
rings for a range of temperatures, pressures, and other environmental
conditions. From prototypes to high volume production runs, all our
aircraft seal rings go through demanding quality assurance processes and
meet all applicable DOD, FAA, and Mil-Spec requirements.
We focus on the design and fabrication of custom piston rings .
We specialize in piston rings for harsh environments, including extreme
temperatures, high pressures, and tight tolerance requirements.
Applications for our piston rings include gas turbines, jet engines,
rockets, steam valves, nuclear power exploration, and coal liquefaction.
Piston
rings are used to help reduce leakage, and are often viewed as
sacrificial components. In order to ensure the best results, we
recommend testing the ring, especially where leakage is critical.
Precision Rings can provide leakage estimates if required.
Piston rings can be manufactured from custom prints, or Precision Rings’
engineering team can design a custom piston ring for your application.
Following the submission of your engineering design sheet, Precision
Rings will develop a piston ring design that will meet your unique requirements. Typical design time is less than five business days.
The critical piece of any successful organization is its people, their
attitude, their expertise and ultimately, the results they produce.
Precision rings incorporated's production personnel take great pride in
giving attention to every detail throughout the entire manufacturing
process of piston rings and seal rings. This results in finished products that satisfy
Precision rings incorporated's high quality standards. Knowledgeable
management, dedicated employees, and modern technology allow Precision piston rings incorporated to fulfill the needs of the highly sophisticated industries we serve.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
Engine
is like a car's "heart", but the piston can be understood as is the
"center" of the engine. In addition to living in harsh working
environment, it is the busiest one in the engine, constantly engaged
from the bottom dead center to the TDC, suction, compression,
workmanship, exhaust.... The interior design of the piston is emptying,
more like a hat. The both ends of the hole are connected with the piston pin ,
which connects the smaller head of the connecting rod, and the bigger
one of the connecting rod is connected with the crankshaft. Under this
assembly, the reciprocating motion of the piston is transformed into the
circular one of the crankshaft.
There are three lines at each piston
skirt, it is with the purpose of installing two gas rings and an oil
ring, and the gas ring is top loading. In the assembly, the opening of
two gas rings need to be stagger so that they have the sealed effect.
The main role of the oil ring is to scrape the excess lubricating oil
splashed on the cylinder wall. At present, the widely used material of
the piston ring mainly has the high quality gray iron, ductile iron,
alloy cast iron, etc.
In addition, due to the different position of piston ring ,
the surface treatment they use it is different, too. The external
circular surface of the first piston ring is usually processed by chrome
or spraying molybdenum, which the main function is to improve the
lubrication and abradability of the piston ring. Other piston rings are
mostly processed by tinning or phosphatization in order to improve its
abrasion resistance.
If the piston ring is improperly installed
or sealing is not good, it will cause that oil on the cylinder wall flow
into the combustion chamber and burn together with the mixing gas, that
is the phenomenon of burning oil. If the clearance between the piston
ring and cylinder
wall is too small or the piston ring was jammed in the ring groove for
carbon deposition, the cylinder wall probably will be scratched when the
piston is doing the reciprocating movement. Besides, it will form very
deep grooves on the cylinder wall after a long time, which is often said
that the " cylinder scoring " phenomenon. Cylinder wall with grooves,
bad sealing, also can cause burning oil. Therefore, it should be
regularly check the working condition of the piston and ensure the operation of the engine in good condition.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
The auto parts
retail industry enjoys resilience even during times of economic
downturn. "As Americans buy fewer new cars, they are spending more to
maintain existing vehicles." However. reports that the auto parts
industry is highly concentrated in that the 50 largest companies
generate about half of the industry's total revenue. Before you open an
auto parts store, you must conduct thorough research of your market.
Step 1
Pick a location. As an auto parts retailer, location is important for
the viability of your business. Determine the saturation of auto parts stores
in and around your prospective area of business. Research the nature of
your potential buyers as well as their purchasing power. Your town's
zoning commission can provide you with information on the latest mapping
of your store location and the surrounding areas.
Step 2
Obtain the appropriate business license and permits. States have
varying rules and regulations pertaining to business licensing, permits
issuance and business registration. Generally, you must register your
business and obtain a general business license. Because you are going to
sell auto parts , you must file for a sales tax registration as well. If you are going to sell DFM auto parts
, you might need to obtain a separate license, depending on your
business location. For example, in Sacramento, California, and in
Georgia, used auto parts retailers need a special business license and a
used motor vehicle parts license, respectively. To find out which
government agency processes registration and issues licenses and permits
in your state, go to SBA.gov, click the "Starting & Managing a
Business" pull-down menu and click "Search for Business Licenses and
Permits." Your state business licensing agency should direct you to the
appropriate agency for auto parts retailers in your locale.
Step 3
Hire cashiers and sales staff. The number you will need depends on the
size of your store. Your sales staff must be familiar with, if not
experts in, auto parts and the mechanics of auto parts production . It helps if they have training in the repair and maintenance of vehicles.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
When it comes to searching for various auto parts
for imports, there are many different methods in which a person can
find exactly what they need. Several of these methods are clean cut as
well as genuine. On the other hand, some of the methods used to find
auto parts for imports are downright risky; for example, purchasing
secondhand parts from places such as scrapyards, auto repair shops, and
salvage yards. Even more disturbing is the fact that most auto repair
shops will place used parts into a vehicle rather than new ones, which
will increase the chance of something going wrong with the vehicle
sooner rather than later. This is a move that is done usually to allow
the auto repair shop to save money. Here are a few of the risks
associated with purchasing spare parts for your import vehicle that you should make note of, courtesy of Southwest Imports Auto Parts.
PAST HISTORY
When it comes to purchasing auto parts online
for imports, it is extremely important to get familiar with the past
history of the specific parts you are looking to purchase. For example,
if you purchase used parts from a junkyard, there really is no surefire
way to know whether or not it actually came from a car or something
else. In addition, used parts generally are not under any kind of a
warranty, meaning you will be forced to use them at your own risk.
UNRELIABILITY
As previously mentioned, used parts can also oftentimes be purchased
from auto repair shops; however, these parts are usually kept in a big
pile at the back of the shop. For example, imagine that you were looking
to purchase a generator for your vehicle from your local auto repair
shop - how would you know for sure that the generator will last for as
long as you need it to? Chances are that parts purchased from auto
repair shops do not work very well, as the risk is always there for them
to either malfunction or stop working completely. While some auto parts suppliers
will sometimes offer exchanges or refunds if used parts stop working,
it's generally a good idea to avoid purchasing them altogether.
GETTING RIPPED OFF
Perhaps the biggest risk involved with purchasing used auto parts for
imports is getting ripped off by the person or shop selling them. If you
were to experience this, chances are you would be unable to ever find
or track down the individual who sold the parts to you should something
happen to them once you get them installed.
Whether the parts
you purchase perform their jobs or not, the reality is that purchasing
used auto parts for imports is downright risky. The best way to prevent
this is to instead focus on purchasing new parts that will work for many years to come.
The first：the rapid development of domestic automobile market
China has its own special national conditions, our income gap is larger
than the countries’ which are powerful in automobile industry. The size
of the income gap will play a vital role in the popular speed of
durable consumer goods. The smaller the income gap is, the shorter the
time of the popular speed takes, and vice versa.
The income gap is relatively bigger which determine the popular speed of car in China is relatively slower, thus China's auto parts market
will maintain a longer period of sustained growth, which also win a
relatively long period of development for weak brand enterprises.
The second: accelerate the domestic automobile industry’s internationalization
During the twelfth five year period, the state will vigorously promote
the internationalization of the automobile industry, and encourage the automobile enterprises to go out. But with international OEMs, it will also be a good pulling effect for China's independent parts enterprises.
Now the selling point of our automobile products match well with the
demands of the consumers. At present, the world wide, South America is
the fastest in the sales growth of auto products, South Korea, Japan and
African market is also growing rapidly. However, the people in these
countries pay more emphasis on the low price of automotive products. At
the same time, with the country actively promoting the internationalized
road of automobile industry ,
our country becoming auto power will also be just around the corner. So
under such a background, auto parts enterprises will also usher in new
developing opportunities.
The third: the rapid development of the independent automobile enterprise
China's auto market is undergoing a new change, that is the two or
three line market, especially the three line market is becoming the main
growth and support point of China's auto parts development
in the future. And consumers in three line of the market are not
interested in foreign cars, instead, they pay more attention to economic
applicability of automobile. Meanwhile, influenced by Chinese
traditional thought, they have their own understanding about the
appearance of the car. According to these characteristics, the
independent brand cars has more developing advantage.
As the domestic independent brand enterprise is gradually strong, it will pull the rapid development of domestic auto parts industry . Domestic independent brand enterprises should grasp the opportunity and seek better development.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
Everyday life brings all sorts of hardships not only to people, but
also to their cars. Road-metal or car accidents may cause damages and
scratches. This may upset car owners because the overall image of the
vehicle can get significantly harmed. Buying auto parts
in workshops takes a lot of time and, of course, a good sum of money.
If you urgently need to replace a part or perhaps something in the range
of tuning, you can simply buy car parts online. The main advantage is
that prices are usually very low and the payment process is very
convenient. Buying online is the easiest way to acquire car parts .
Japanese brands also offer a wide range of products, so finding car
parts for Honda should be no problem. Purchasing car parts online should
also be interesting and convenient for tuning-fans. So if you need BMW
or Honda car parts, try to search the Internet and you will find the
most profitable offers.
There are many reasons to buy new car parts
. Old parts are often defective or used, especially the ones you have
to replace regularly, like windscreen wipers or brakes. Non-familiars
with parts replacing should take advices from an expert. However, car
parts in workshops are often very expensive. A good alternative is to
buy the necessary auto parts over the Internet. There are many vendors,
who offer appropriate spare parts for each vehicle or car parts makers,
who provide auto parts online
for specific car brands. The Internet is an easy and quick way to find
the required spare parts. In some cases you will need professional
assistance; in others – you will be able to replace parts by yourself.
Here you will always find the right products and they are often
considerably cheaper.
Buying in the Internet, you don`t just
choose among the diversity of the offered products, but also save time
and money. Thus, you can quickly choose suitable vehicle parts
for your car. They are also high-quality, but at a moderate price.
Nameless products are still preferred. They can be high-quality, but
have no guarantee. Apart from that, there is a lot of information in the
Internet about how to repair a car or to replace spare parts.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
During the 1920s and 1930s the mass adoption of the Commercial Vehicle
in the United States left few facets of everyday life untouched, and
the young technology became deeply woven into the fabric of the
country's economy, mobility patterns, and culture. As cities became
larger and denser, industries increasingly sought cheap land on the
urban periphery where they could erect the large, horizontally
configured factories that mass production techniques necessitated.
Wealthier urbanites, too, dispersed into out-lying suburban areas,
closely trailed by retail stores seeking their patronage. Across rural
America, larger trading areas hastened the death of the village general
store, cut into small local banks' deposits, forced the mail-order
houses to open suburban retail stores, and prompted the large-scale
reorganization of both retail and wholesale trades, particularly as they
fought to stay afloat during the Great Depression. Urban amenities,
too, reached into formerly isolated rural areas, most auto parts suppliers
notably in the form of far better medical care and consolidated
schools. The Model T, the motor truck, and the motorized tractor also
played a role in the reorganization of the agricultural sector as
large-scale agribusiness began to replace the traditional family farm.
Large-scale use of automobiles had a tremendous effect on the cities,
too. Public health benefited as horses disappeared from cities; but
street life became increasingly hazardous, especially for playing
children, and automobile accidents became a major cause of deaths and
permanent disabilities. Modern city planning and traffic engineering
arose to meet growing traffic and parking problems; and attempts to
accommodate the motorcar through longer blocks, wider streets, and
narrower sidewalks strained municipal budgets even as they undercut the
tax base by encouraging residential dispersal. Parents complained that auto parts online
undercut their authority by moving courtship from the living room into
the rumble seat; police complained that getaway cars made it more
difficult to catch crooks. Recreational activities changed, too, as the
automobile vacation to the seashore or the mountains became
institutionalized and as the Sunday golf game or drive became
alternatives to church attendance, the family dinner, and a neighborhood
stroll.
By the mid-1920s auto parts manufacturer
ranked first in value of product and third in value of exports among
American industries. The automobile industry had become the lifeblood of
the petroleum, steel, plate glass, rubber, and lacquer industries, and
the rise of many new small businesses, such as service stations and
tourist accommodations, depended on the 26.7 million motor vehicles
registered in the United States in 1929—one for every 4.5 persons—and
the estimated 198 billion miles they traveled. Construction of streets
and highways was the second largest item of governmental expenditure
during the 1920s, accounting in 1929 alone for over $2.2 billion in road
expenditures, financed in part by $849 million in special motor vehicle
taxes, $431 million in gasoline taxes, and the steady expansion of the
federal-aid road system that began dispersing funds in 1916.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
1, Bargaining power of the Supplier
With the intensification of competition in the commercial vehicle industry ,
the profit of commercial product is more and more thin. At the same
time, product cost controlling had become the essential rules of
enterprise survival. However, the most important job of product cost
controlling is to depress the purchasing cost of the raw material. The
price competition between the supplier and the commercial vehicle production
enterprises is also very fierce, the outcome of this competition
depends on the strength of the supplier and production enterprises.
Generally speaking, if the vehicle brand is better and more sales, then
it can have a relatively greater pricing power; In turn, if the strength
of suppliers is more powerful, product technology content is higher,
the market share is bigger, then it will be dominant in price
competition.
Because the high-grade commercial vehicles are
basically the product of foreign joint venture in China, the brand also
is introduced from abroad, so the foreign parent company also become its
suppliers inevitably. In this case, the bargaining power of producers
become very weak, some foreign companies use the inequality relations
between supply and demand to transfer price and eat the interests of the
joint venture. From this perspective, some medium and low commercial vehicle enterprises in domestic have a relatively strong bargaining power.
2, Competitive strategy analysis for commercial vehicle products
Commercial vehicle really need to improve the level of technology in
our country. But China is a developing country, not a higher technology
is more effective. Joint venture enterprise doesn’t have to bring their
most high-grade technology, it must combine with characteristics of
China’s market, improve the technology of the existing brand vehicle and
maintain an appropriate price, only then do the enterprise have the
market competitiveness. Unsuccessful joint ventures often desperately
engaged in technology transfer, spent a lot of cost and naturally must
raise the price, so the outcome was that they lost the market.
3, Expectation of competition pattern for commercial vehicle industry
In some cooperation projects which is operated by Sino foreign joint
venture, the cooperation model also undergo significant changes, that is
from using foreign brands and producing foreign models to running
Chinese brands jointly and entering the international market together.
This kind of change is based on the current situation of China's
commercial vehicle market, China's commercial vehicle market
has distinctive demand characteristic and unique product structure, so
foreign truck products are not suitable for the Chinese market at the
present stage. On the other hand, in this round of joint venture
cooperation, the foreign strategy is more flexible than before, but the
China's right to speak is gradually enhanced.
Due to the impact
of the international financial crisis, many commercial vehicle
enterprises are trying to find new developmental opportunities, and the
consequent, the market pattern of the global commercial vehicle
including China is quietly changed. In the process of rewriting the
commercial vehicle’s market pattern, Chinese enterprises are facing the
challenges as well as the opportunities. For the domestic commercial vehicle enterprises ,
although China is the world's the most important and most potential
market, the inevitable outcome of the development is going out.
Therefore, how to utilize the limited period of growth to form the
independent research and development ability and complete sales network
in overseas markets will become the top priority in the development of
enterprises.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
1.
See qualified spare parts surface appearance, print or type and legible
and formal there are both certain accuracy and polished finish, the
more important parts, precision is higher, more rigorous rustproof
packaging. When the choose and buy if found auto parts with rust spots or rubber parts cracked, loss of elasticity, or shaft neck surface has obvious tool lines, shall be returned.
2.
The bad work product appearance although on occasion, but due to poor
craftsmanship, prone to crack, sand holes, slag inclusion, burr or
bruised. Such as cylinder gasket extrusion deformation, when using, easy
to cause the untight seal and ablation, lead to the oil, gas leakage
and leakage phenomenon.
3. See "loose" made up of two or more than
two parts, accessories parts by being connected, bonding or between
welding and become, not allowed to have loose phenomenon.
4. See
assembly mark in order to ensure the parts assembly relations conforms
to the technical requirements, with some regular parts surface marker
assembly, such as timing gear, piston top marks, such as assembly mark,
mark is used to ensure the auto parts suppliers , without a sign or mark fuzzy cannot recognize, will bring great difficulty to assembly, or even wrong.
5.
See gaps complete formal assembly parts must be in good condition, to
ensure smooth loading and normal operation. Some assembly of small parts
packing, may be a "gray", to cause difficulties for loading. May even
for some small auto parts manufacturer parts shortage, cause the whole assembly parts scrap.
6. The protective layer for the purposes of custody, knock against, prevent parts have protective auto parts production
before delivery. Such as piston pin, bearing bush with paraffin wax
protection; Piston ring and cylinder liner surface rust-proof oil and
paper package; Valve, piston, etc after immersion rust-proof oil
encapsulated with plastic bag. When the choose and buy, if find seal set
of damage, loss of wrapping paper, rust-proof oil or paraffin loss,
shall be returned.
7. The certificate some important components,
especially the assembly class, such as carburetor, distributor,
generators, etc., factory generally with manual, certificate of
approval, to guide users to install, use and maintenance.
8. See
most auto parts have stipulated specifications and technical parameters.
Such as electrical equipment of choose and buy when, should pay
attention to check and be in auto parts online of the voltage and power are consistent.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
At present, many factors which promote the price reduction of the auto parts
have emerged. For example, the rapid growth in vehicle sales bring the
auto parts’ mass production and domestic parts gradually replace
imported parts, all of these will decrease in the cost of parts
production. The entering of international manufacturers and other
capital strengthen the accessories market competition and also promote
the parts prices down. Unfortunately, the impact of the above factors
are weaker than the vehicle manufacturers. Auto parts manufacturers
mainly cooperate with the requirements of vehicle manufacturers, the
price of auto parts in the 4S shop are mainly determined by vehicle
manufacturers. When the vehicle manufacturers don’t feel the pressure
from the consumer, they naturally won’t cut the price of spare parts.
So, why the consumer did not give the vehicle manufacturer with enough
pressure? The reason is not complicated. The proportion that the buyer
buy a new car for the first time is very high. These people lack the
experience of the car, so the key consideration of purchase is the
vehicle price, brand and appearance design. However, for the use of the
car cost and the price of spare parts , they pay little attention.
This is the case, the price of auto parts can down, but it is when,
this will depend on the degree of consumer maturity and competition
between vehicle manufacturers .
When more and more consumers gradually rich the experience in the car,
the attention to parts prices will gradually rise, too. At the same
time, the fierce market competition will force the vehicle manufacturers
to obtain competitive advantages from all aspects, at that time, the
vehicle manufacturers will automatically cut the price of the auto
parts.
The cost of buying a car is one-off defrayment, basically
irreversible. But the cost of auto parts is uncertain, greedy and
endless, so it must attract attention, especially, we should clearly
understand this issue while we appeal against the extravagant profits of auto parts .
Study automotive repair and try to find some tips. on Based on the
quality guarantee of maintenance, we spend less and cause less
difficult. At the same time, when buying a car, it is important to note
the supply situation of that car’s auto parts.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
1, The trend of the supporting system and modular supply is in the ascendant
The increasingly fierce market competition forces the change of the
whole car system: purchase a single component to purchase the whole
one.The system is not only beneficial to oems to make full use of spare parts enterprises
professional advantage, but also can simplify the work and shorten the
development cycle of new products. Parts suppliers must have a stronger
technology development strength so that it can provide more system
products and technology for the vehicle assembly plant. The more and
more manufacturers are involved in the development and research of new
products, its technical and economic strength is becoming more and more
powerful.
On the basis of supporting system, bigger auto parts manufacturing
enterprises put forward the concept of modular supply. The so-called
module refers to the highly integrated and multi-function large parts
which is formed by the arrangement of components and systems. In the
modular supply, parts enterprises take up many development work of new
products and technology. Not only in the product, but also in
technology, Oems more and more depend on parts manufacturers, so auto parts online in the automotive industry has played more and more important position.
2, Procurement Globalization
Under the background of global integration, facing the increasingly
fierce competition, in order to reduce costs, the world's major car
companies expand the production scale while gradually reduce the
self-making ratio of auto parts and use parts global sourcing strategy.
Meanwhile, in order to obtain greater benefits, the international parts
suppliers reduce or even stop the production which is un competitive
advantage, lower value-added and technical content, they purchase
comparative advantage products in the worldwide.
3, Accelerated the speed of industrial transfer
In Japan, Europe and the United States and other developed countries,
relatively high labor costs result in lack of cost advantages in the
production of auto parts products. In order to cope with the market
competition, large auto parts suppliers
in Europe and the United States accelerated the speed of industrial
transfer, countries such as China and India have become major
destinations attracting the industry transfer of global auto parts.
(PS: Our sale contact info. is as below:
Cel.: 86 15872743608
Tel.: 86 719-8111748
Facebook: miaoyuexport
Skype: Ada-miaoyu
Q Q:1105378431
E-mail：ada@miao-yu.com / inquiry@miao-yu.com
Website: www.imyautoparts.com)
